REN™ Clean Instructions for use:

Safely block all passenger traffic from escalator before starting cleaning procedure

  1. Mount the cleaning pad, with the white side to the back of the device.

  2. Pre-spray dirty, neglected escalator treads. Allow 5 to 10 minutes dwell time before cleaning.

  3. Fill saturation tub with specified amount of cleaning solution, place the device into the tub and compress firmly with pumping action until the pad is saturated.

  4. Center the device with the oncoming escalator treads, place device on escalator and apply moderate downward pressure to aid in the cleaning cycle.

Need printed instructions?

Safety Tips:

  1. Never stand or step on the device.

  2. Keep hands, loose items, clothing, hair & jewellery away from device during operation.

  3. Make sure escalator is completely dry before allowing passengers back on.

  4. Always use the handle to place and remove the device from the escalator.

TREAD CLEAN & Dilution Recommendations:

REN™ Clean developed TREAD CLEAN solution for use with Cleaning Pads to achieve maximum results for both restorative, deep cleaning and daily maintenance use. 

10:1 dilution ratio is recommended for Maintenance, Restorative and Emergency spill resolution.          

Recommended cleaning solution amount by pad size:

  • For a 60 cm pad -- use 500 ml of diluted cleaning solution.

  • For a 80 cm pad -- use 600 ml of diluted cleaning solution.

  • For a 100 cm pad -- use 700 ml of diluted cleaning solution.

Tips for more effective cleaning with REN™ Clean:

  1. Perform a restorative cleaning to get your escalator up to your facilities standards.

  2. Schedule regular maintenance cleanings and keep your escalators clean and safe.

  3. Have your staff trained and a procedure documented for emergency spill deployment.